• Free Shipping on orders of $149 or more (Canada only) -- Curb Side Pick Up Available(up to 1 day wait). Use Discount Code "pickupfromstore".
With the suspension of the US de minimis import exception, all low-value shipments, regardless of origin, transportation mode, or entry method, now require formal customs entry and the payment of all applicable duties, taxes, and fees. Unfortunately we have not been able to keep up with the logistic hurdles this evolving situation has caused. Due to this change, we will be pausing all US orders for the foreseeable future until there is a workable solution. Our American customers have always been an integral support to our business, so we thank you for your continued support and understanding during this transition.

Renia Syntic (850g ~ 1L)

$54.65

Renia Syntic is a polyurethane-based contact cement for bonding all materials associated with shoe making and shoe repair. Free of toluene and Methyl ethyl ketone (MEK).

Bonds all materials used for repairing and producing shoes and boots like leather, rubber, EVA, thermoplastic rubber (TR), expanded rubber, PVC (Vinyl) , felt, cork, transparent materials, Perbunan-N, nylon, and more. 


INSTRUCTIONS:
Grind all materials and remove all grinding dust and fibres. Coat both sides with Renia  Syntic until you can see a layer of cement. If necessary, apply a second coat to absorbent materials.

TR (Thermoplastic Rubber): Apply Renia-Rehagol and coat after 15 minutes with Syntic. PUR (Polyurethane): After grinding, press the material with absorbent paper to remove the water. Then coat it with a thin layer of Renia-Syntic to reinforce very soft polyurethane. Apply another layer of adhesive on top of the dried first layer if necessary.


OPEN ASSEMBLY TIME:
Depends on the material: 5 - 30 minutes (TR 3-15 minutes, PVC 10 - 45 minutes). Syntic can be dried with an infra red lamp: IR-Lamp 176 °F: 3 minutes.


PRESSURE:
15 - 60 psi depending on the material
15 psi minimum time 60 seconds, 45 psi minimum time 30 seconds
The softer the material the less pressure is needed. Reduce pressure to 15 - 25 psi for soft materials or air cushion soles. Caution: Do not deform materials during pressing, otherwise the adhesive film will be destroyed.


HIGHLIGHTS:
Because of the fast crystallisation and the high initial bond strength of Renia-Syntic, it is possible to handle the bonded pieces after a few minutes. The heat resistance is high enough to trim or buffer the sole or heel. The bonding strength increases continuously during the first two days. Although the plasticizer resistance is already extremely high as a one-component system, adding 5-10 % hardener further increases the resistance against heat, oil, and other chemical influences.


SHELF-LIFE:
Minimum 12 months at 68 °F


THINNER:
RENIA - R & L - Cleaner (or acetone)

    • SKU:
      RENIASYT-1L
    • Vendor :LSSD Leather
    • Product Type :Adhesives

    Renia Syntic is a polyurethane-based contact cement for bonding all materials associated with shoe making and shoe repair. Free of toluene and Methyl ethyl ketone (MEK).

    Bonds all materials used for repairing and producing shoes and boots like leather, rubber, EVA, thermoplastic rubber (TR), expanded rubber, PVC (Vinyl) , felt, cork, transparent materials, Perbunan-N, nylon, and more. 


    INSTRUCTIONS:
    Grind all materials and remove all grinding dust and fibres. Coat both sides with Renia  Syntic until you can see a layer of cement. If necessary, apply a second coat to absorbent materials.

    TR (Thermoplastic Rubber): Apply Renia-Rehagol and coat after 15 minutes with Syntic. PUR (Polyurethane): After grinding, press the material with absorbent paper to remove the water. Then coat it with a thin layer of Renia-Syntic to reinforce very soft polyurethane. Apply another layer of adhesive on top of the dried first layer if necessary.


    OPEN ASSEMBLY TIME:
    Depends on the material: 5 - 30 minutes (TR 3-15 minutes, PVC 10 - 45 minutes). Syntic can be dried with an infra red lamp: IR-Lamp 176 °F: 3 minutes.


    PRESSURE:
    15 - 60 psi depending on the material
    15 psi minimum time 60 seconds, 45 psi minimum time 30 seconds
    The softer the material the less pressure is needed. Reduce pressure to 15 - 25 psi for soft materials or air cushion soles. Caution: Do not deform materials during pressing, otherwise the adhesive film will be destroyed.


    HIGHLIGHTS:
    Because of the fast crystallisation and the high initial bond strength of Renia-Syntic, it is possible to handle the bonded pieces after a few minutes. The heat resistance is high enough to trim or buffer the sole or heel. The bonding strength increases continuously during the first two days. Although the plasticizer resistance is already extremely high as a one-component system, adding 5-10 % hardener further increases the resistance against heat, oil, and other chemical influences.


    SHELF-LIFE:
    Minimum 12 months at 68 °F


    THINNER:
    RENIA - R & L - Cleaner (or acetone)